- Your cart is empty
- Continue Shopping
Delivery across Kenya · Secure M-Pesa & card payments via Pesapal
XiaoZhi AI Voice Assistant Kit – ESP32-C3 Board, 0.96″ OLED, Speaker & Case
XiaoZhi AI Voice Assistant Kit – ESP32-C3 Board, 0.96″ OLED, Speaker & Case
KShs 2,950.00
Build your own talking AI assistant. ESP32-C3 board with microphone, 0.96″ OLED, speaker and white case, running the open-source XiaoZhi firmware. Connects over Wi-Fi to the xiaozhi.me service and AI models such as DeepSeek, Qwen and Doubao.
Overview
This kit is a small voice assistant you can hold in one hand. Say the wake phrase, ask a question, and the answer is spoken through the speaker while the 0.96″ OLED shows the device’s status. It is built on an ESP32-C3 board with a microphone, a speaker output and a battery connector, and comes with a speaker and a white XIAOZHI.ME case.
The board runs XiaoZhi, an open-source ESP32 voice-assistant firmware. It connects to your 2.4 GHz Wi-Fi and to the xiaozhi.me online service, where you pick the character, voice and language model. The seller lists DeepSeek, Qwen and Doubao among the supported models. It is a good starting point for learning how voice AI devices work, or as the base for your own AI gadget.
Key Features
- ESP32-C3 with 2.4 GHz Wi-Fi and Bluetooth LE
- On-board microphone and speaker output, speaker included
- 0.96″ OLED status display
- Wake-up button: press once to continue a conversation
- Power switch and a battery jack for an optional battery
- USB-C for power, charging and firmware flashing
- Voice commands such as “volume up” and “volume down”
- White XIAOZHI.ME case with front window
Specifications
| Specification | Details |
|---|---|
| Processor | Espressif ESP32-C3, 32-bit RISC-V |
| Wireless | Wi-Fi 2.4 GHz, Bluetooth LE |
| Display | 0.96″ OLED (I2C header: GND, VCC, SCL, SDA) |
| Audio | On-board microphone; speaker jack with speaker included |
| Controls | Wake-up / interrupt button, power switch |
| Connectors | USB-C (power, charging, flashing), speaker jack, battery jack |
| Board size | 36 x 36 mm |
| Firmware | XiaoZhi (open source), connects to xiaozhi.me |
| AI models | Chosen in the xiaozhi.me console; the seller lists DeepSeek, Qwen and Doubao |
Getting Started
- Power the board with a USB-C cable and switch it on.
- Connect it to your home Wi-Fi (2.4 GHz).
- Bind the device to your account on xiaozhi.me.
- Press the wake-up button, or say the wake phrase “Hello Xiaozhi”, and start talking.
What’s in the Box
- 1 x ESP32-C3 AI voice board with 0.96″ OLED
- 1 x speaker with cable
- 1 x case: front shell, back cover, front panel, switch cap and 2 screws
Please Note
- The assistant needs a 2.4 GHz Wi-Fi connection and internet access. The voice service is run by xiaozhi.me, not by IoT Robotics, and its features and limits may change.
- On-screen status text is in Chinese in the standard firmware.
- A battery and USB-C cable are not included.
- Before passing the device to someone else, unbind it from your xiaozhi.me account.
- Move the power switch gently.
