Savox SC-0254MG Standard Digital Servo – 7.2 kg.cm, Metal Gear, 0.14 s/60°

Overview

The Savox SC-0254MG is a standard-size digital servo with a full metal gear train, aimed at applications where a plastic-geared servo would not survive. It delivers 7.2 kg.cm (100 oz-in) of torque and moves 60 degrees in 0.14 seconds at 6 V.

Digital control gives it firmer holding torque and finer resolution than an analogue servo of the same size, and the soft start feature eases it into position on power-up. It suits robotics projects, robotic arms, steering and throttle linkages, pan and tilt heads and RC models.

Key Features

• Digital servo with soft start
• Metal gear train for durability under load
• Standard servo case size and mounting pattern
• Runs from a normal 4.8 – 6 V receiver or servo supply
• Suitable for robotics, RC cars and 30-60 size aircraft

Specifications

Please Note

• Servo horns and mounting hardware as supplied by the manufacturer. A receiver, servo tester or controller is not included.
• Use a servo supply that can handle the stall current; powering it from a microcontroller’s 5 V pin will reset the board.